Folding Fan

PREORDER

panels 9.4 x 1.14 inches, mold 9.8 x 2.6

spines 9.96 x .9, mold 9.7 x 5.6

you can buy this in a half set, with the double panel and one spine mold, or as a full set with two spine molds. this will give you one extra spine, as the fan is generally 2 panels and 11 spines, but you could also just do all 12 as well and cut the fabric longer!

these are 1/16th thick and WILL take LONGER to full cure and even then will still be less stiff than normal resin pieces. thats fine, and you can dome the panels after painting on the front to give it a bit more rigidity. these will be slightly flexible, please expect that but still give at least 72 hours to full cure. i attached the fabric by painting on 3600 glue and some thicker dots of the glue and pressing the fabric down to the spines. its not super easy to do evenly :D

Colors vary and are selected at random.

All molds are handmade and subject to minor flaws.

Silicone molds are NOT food safe.